How To Reset Hikvision Camera To Factory Defaults?

In the world of surveillance and security, Hikvision camera are trusted for their reliability and functionality. However, there are instances when you might need to reset Hikvision camera to its factory defaults. Whether you’ve forgotten the password or are repurposing the camera, this guide will walk you through two effective methods to reset Hik camera.

How To Reset IP Camera Without Reset Button?

Locate the Reset Button:

For Hikvision IP cameras, the reset button is typically situated near the memory card slot. It’s often an inconspicuous push-type button. Look for it on your camera.

Power Off the Camera:

Disconnect the camera’s power supply cable or the PoE (Power over Ethernet) cable to turn off the camera.

Press and Hold the Reset Button:

With the camera powered off, press and hold the reset button using a pointed object (e.g., a paperclip or pen tip). Hold the button down securely.

Power Up the Camera:

While still holding the reset button, reconnect the camera’s power supply or PoE cable. The camera will start powering up.

Keep Holding for 15-20 Seconds:

Continue holding the reset button for approximately 15 to 20 seconds. This will initiate the reset process.

Release the Reset Button:

After the designated time has passed, release the reset button. The camera will now be reset to its factory defaults.

Reconfigure the Camera:

It’s important to note that after the reset, all previous configurations, including the IP address, will be lost. You’ll need to use the SAPD (SADP) tool or a web browser to set up the camera again.

    Access the Camera Menu:

    If you don’t have direct physical access to the camera, you can use a web browser to access the camera’s menu remotely.

    Navigate to Restore Settings:

    Within the camera menu, go to Configuration > Maintenance > Upgrade & Maintenance > Default > Restore.

    Perform the Restore:

    Click on the “Restore” option. This action will reset hikvision ip camera parameters to their factory defaults, except for the IP address currently assigned to the camera.

    Advantages of Web Browser Reset:

    Resetting the camera through a web browser is particularly beneficial when you’re working remotely. This method ensures that you don’t lose access to your IP camera during the restoration process. If you’re new to working with Hikvision IP cameras, using the “Restore” option is highly recommended.

    Conclusion:

    Whether you’re dealing with a forgotten password or need to repurpose your Hikvision cameras, resetting it to factory defaults is a straightforward process. By following the step-by-step instructions outlined in this guide, you can confidently reset your camera using either the hard reset method or the web browser method.

    Blog Section
    Shop By Categories
    Shopping Cart
    Scroll to Top